I have started playing with Sketchup

It is quite interesting and I have a long way to go. Started with something simple, a Floodlight Tractor Trailer Shed. Basic structure is done. Now I need information on the sizes and locations of the windows. I have seen them high up on the wall and lower, seems to have been however the contractor interpreted the drawings! I know there had to be standard sizes for the windows, anybody have that information?



Here is the one at Rivenhall with the windows up high:



And here is the one at Bodney with the windows in the lower position:

With some measurements I made and more provided by REF, I came up with this Norden Store:



Have to figure out how to do corrogated roofing for the small lean to on the side.

Karl

There is a texture in sketchup for corrugated sheeting it's best done with that if you draw it corrugated the file will get very big, I made that mistake until PB put me right.