More buildings on the Virtual Workbench

The roof could be added but on a seperate layer in the model that can be truned on & off as required.

There are a couple of a slight problems with putting a roof on:

The model is intended to show the RIM internals, and the MoD drawings are hopeless when it comes to the actual roof dimensions.

I see what you mean Paul the roof is a tad vague.

norwichpaul;100394 wrote:

paul i can loan you all the drawings you need on thursday, if your at work.

Cheers Paul,

I'll certainly be in on Thursday.

All the best,
PB

RIM interior structures placed in, starting to add door openings etc.



Once the heating and air-con systems go in this will start getting busy very quickly...

Your file size is going to shoot up when you start doing all that stuff Paul, but its really looking good.

Excellent!

Interior structure walls and raised floors in place where required, front annexe basic structure built.
Starting to knock holes through for windows and doors now.



I'm puzzling over the servicing bay seen in the upper left corner of the hangar.
This had two 1-ton overhead gantries running from the ends of the stub walls to the hangar wall, but I don't know whether they ran from the top of the walls (so 10' off the ground) or were slung from the underside of the roof framework...

Back to the grind,
PB

Looks good Paul.

1 ton gantries could possibly be hung frm the gantries but the walls would be a much better choice.